The upgrade process is very easy, follow the following 7 steps, You can upgrade successfully, if you have any other problems when you using this controller, please contact us at any time.

Upgrade the Switch Controller Version 1

Step 1: Download the compression package and extract file on PC.



Step 2: Open the file, display the following image.

Step 3: Connect your controller to PC with the included USB cable and wait until ONLY the 1st LED flash. (the usb cable must have date transfer function)

Step 4: Then press and hold down X,Y & HOME button at a time about 3 seconds, the grayed out “Update Firmware” option will auto enable.

Step 5: Click the “Update Firmware” button to begin upgrade.

Step6: When the upgrade process is completed, please disconnect the usb cable from computer and let the controller at power-off status.


Step7:On console, please operate by the following steps to clear all the infamation of controllers : System Settings →Controllers and Sensors→Disconnect Controllers. Then restart the console, enter into interface of Controllers→Change Grip/Order, refer to the instructions for the first-time connnecting method, press Y+HOME keys to connect.



You may also like